window rattle/vibration
Check to see if your windows are trying to close too far. I have seen where the power window motor will try lift the window about a 1/16 to an 1/8 of an inch to high. Once the window hits the top gasket it can't go any higher so the bottom of the window moves out away from the side gaskets.
Easy way to see if this is your problem is to lower each window the smallest amount you can, 1/16 inch, and see if the noise and vibration go away.
I'm only a peasant here.
Easy way to see if this is your problem is to lower each window the smallest amount you can, 1/16 inch, and see if the noise and vibration go away.
I'm only a peasant here.
______________________________________________________