Page 1 of 1
Suzuki kizashi rear shock failure
Posted: Sun Oct 23, 2016 8:08 pm
by sam.ostrowski
On a 2010 Suzuki kizashi what is the part on the car that the shock attached to ? I've heard it called an upper mount on other vehicles. My eyeballs are falling out trying to locate the name or picture in parts diagram what is is! I just need to bolt that in. I have a new shock my boot . Thanks!
Re: Suzuki kizashi rear shock failure
Posted: Mon Oct 24, 2016 12:35 am
by BLyons
Upper support or shock mount?
I'm guessing you're talking about #5 or #9 in this diagram.
https://monsterfactoryparts.com/parts/2 ... am=1470525
Re: Suzuki kizashi rear shock failure
Posted: Mon Oct 24, 2016 12:46 am
by sam.ostrowski
Have no. 5. Is no. 9 in the wheel well attached to the car? The picture does look like the part...
Re: Suzuki kizashi rear shock failure
Posted: Mon Oct 24, 2016 12:39 pm
by Ronzuki
Yes #9 is attached to the car with the shock. It is how the upper shock is attached to the body of the car and will remain attached to the shock when you remove the entire assembly. The #9 part will need to be taken off the old shock and attached to the new one before re-installation.
Re: Suzuki kizashi rear shock failure
Posted: Mon Oct 24, 2016 4:59 pm
by sam.ostrowski
Thanks!