Search found 510 matches

by SAEED_KIZZY
Fri Apr 12, 2024 6:50 pm
Forum: Kizashi DIY Write-ups & Posts
Topic: Cleaning PCV valve
Replies: 3
Views: 4863

Re: Cleaning PCV valve

car at 193,000km as preventative maintenance, I bought an OE PCV valve with the hose and wanted to replace both but the hose is too hard to pinch at the intake manifold so I didn't risk it just replaced the PCV valve ;). the part number for PCV value is 18118-78K00 and hose 11192-57L00. photo_2024-0...
by SAEED_KIZZY
Fri Apr 12, 2024 6:19 pm
Forum: Chat About the Kizashi
Topic: What Did You Do With Your Kizashi Today?
Replies: 2117
Views: 1064839

Re: What Did You Do With Your Kizashi Today?

yes, the ones that I saw with wheel cleaner brush , and a 3-pack brush drill set are also a good choice but I think it is good to use a drill with hammer mode to add vibration for me Milwaukee fuel works great
by SAEED_KIZZY
Fri Apr 12, 2024 3:02 pm
Forum: Chat About the Kizashi
Topic: What Did You Do With Your Kizashi Today?
Replies: 2117
Views: 1064839

Re: What Did You Do With Your Kizashi Today?

I saw a clip about cleaning a car floor mat with a plastic brush I tried it today and wow tons of dust was removed from the floor mat in 5 min!
photo_2024-04-12_17-26-28.jpg
photo_2024-04-12_17-26-38.jpg
photo_2024-04-12_17-26-47.jpg
photo_2024-04-12_17-26-53.jpg
by SAEED_KIZZY
Thu Mar 28, 2024 8:13 am
Forum: Kizashi DIY Write-ups & Posts
Topic: install aftermarket amplifier on Kizashi base without Rockford system
Replies: 41
Views: 47043

Re: install aftermarket amplifier on Kizashi base without Rockford system

that's correct. Keep in mind that because all left or right speakers are spliced from one wire problems in one speaker can cause other speakers to fail too.
by SAEED_KIZZY
Wed Mar 27, 2024 12:30 pm
Forum: Kizashi DIY Write-ups & Posts
Topic: install aftermarket amplifier on Kizashi base without Rockford system
Replies: 41
Views: 47043

Re: install aftermarket amplifier on Kizashi base without Rockford system

2 possibilities:
1- bad woofer and Twitter
2- bad wiring
you need to remove the door trim and then remove the woofer and do the ohm check with the Multimeter.
Are you familiar with electrical wiring and how to read it?
by SAEED_KIZZY
Wed Mar 27, 2024 8:18 am
Forum: Kizashi DIY Write-ups & Posts
Topic: install aftermarket amplifier on Kizashi base without Rockford system
Replies: 41
Views: 47043

Re: install aftermarket amplifier on Kizashi base without Rockford system

I am new to the forum Not being able to post new thread I have a peculiar problem only front door speakers and tweeters are not working. The centre speaker on the dash is working unable to understand the fault. Mine is a base trim non RF no woofer OEM setup welcome Satya166. both front doors or jus...
by SAEED_KIZZY
Sat Mar 09, 2024 6:34 am
Forum: Kizashi DIY Write-ups & Posts
Topic: how to swap heated steats
Replies: 4
Views: 229

Re: how to swap heated steats

there is a procedure in the service manual to replace seat airbags but if there is a liability reason and also assurance I guess you are right. but if you manage to disassemble both seats to replace the seat heater you can easily replace the airbag too it's just 2 bolts both projects are fun to do ;)
by SAEED_KIZZY
Sat Mar 09, 2024 12:06 am
Forum: Kizashi DIY Write-ups & Posts
Topic: how to swap heated steats
Replies: 4
Views: 229

Re: how to swap heated steats

heated seat pads are glued to the seat cushion if you remove them probably you can install them on your new seat with wiring and controller. but you lose the power seat! maybe it's better to put an airbag and cushion from non-powered seat to a power seat this way you have it all.
by SAEED_KIZZY
Fri Mar 01, 2024 10:42 am
Forum: Kizashi DIY Write-ups & Posts
Topic: Seat cover cleaning
Replies: 8
Views: 7251

Re: Seat cover cleaning

oh cool i had no idea that was a thing, i thought only the leather seats were able to be heated an important part of the heated seat are buttons on the AC panel other than that everything is plug-and-play and maybe you can also switch the seat cover front fabric to leather and vice versa but I have...