I own one in Texas that I’m thinking about selling. 107k mi.

Is that too far? She’s a beauty.

Dm me for pics

I'm looking for a pdf of the kizashi service manual but after poking around on the forum i cant seem to find any active links that still work. Can anyone help?

I just tried this out and a 3/4" bolt is not completely correct -- Suzuki would clearly use metric. The correct size is a 20mm with a turn every 2.5mm: M20 x 2.5mm, anywhere from 120 to 150 mm long. Make sure you use a fully threaded tap (hex) bolt. Unfortunately these a very hard to find and e...

Just figured it out. It's a 20mm with a turn every 2.5mm: M20x2.5

Hi guys, I was wondering of anyone knew for certain what the bolt size/threading is for the bolt-hole in the front bumper used for the tow hook. I took my tow hook to Home Depot to see if anything fit but all of the hardware they had was just a bit too small. There is DIY write-up floating around he...

The part engineers got back to me with technical data specifics on the part and here they are (In case the image doesn't load, from top to bottom it reads) # of Teeth: 31 1.0: Module: 1.0 Pressure Angle: 45 degrees Pitch Diameter: Naught 31 Major Diameter: Naught 32.4 (+0.12, 0) Minor Diameter: Naug...

JWB Junk Wheel Bearings

Ya get what ya pay for...there's a reason they were only $54 a piece. I'm a Timken kinda guy. Since you've already gone the Rock Auto route, work w/ them to return the cheapo's that don't fit and ask them to swap them for the Timken units. Yeah, I'd normally think so but this has been the first tim...

So does anyone here already have these Timken hub assemblies installed? I just want to make sure that they actually fit. Crap parts may be crap parts, but even they too should fit.

Just trying to get a testimonial

I ordered a set of WJB wheel hub assemblies from Rock Auto (#WA513333) for the front of the car. I tried putting them on but the splines on the drive shaft were a touch too big for the new hub. We tried a long time to secure a fit but it just didnt want to install. Ya get what ya pay for...there's ...