Abdullah wrote: ↑Sat Feb 27, 2021 7:49 am Nice work


Sent from my GM1910 using Tapatalk

thanks

Today I upgraded my ATOTO headunit to JVC KW-M750BTM. reasons: 1- Android Auto : build in AA with 1.5A USB charge. 2- Audio DSP: with my previous speaker upgrade really needed this feature 3- much better speed and stability tasks needed to be done to install new HU: 1- create new wiring harness. 2- ...

if you have heat inside your car your water pump is fine.
you can remove the thermostat and check again.
maybe your radiator is clogged?!
according to the service manual flow of water is from the radiator into the engine through the thermostat so it gets hot water last.

if I understand you correctly your new thermostat is always closed no matter what temperature your engine have. if so either you install the wrong thermostat or you have air in your system.
I think the thermostat has a bleed valve did you install it correctly?

just a plier to lose PCV and hose.
be careful not to over tight PCV

PCV Valve Inspection 1)Disconnect PCV valve from cylinder head cover and install plug in head cover hole. 2)Run engine at idle speed. 3)Place your finger over end of PCV valve (1) to check for vacuum. If there is no vacuum, check for clogged valve referring to step 4). photo_2021-01-17_14-54-39.jpg ...

Endeavour1200 wrote: ↑Sun Feb 14, 2021 6:06 pm what is the part number for OEM spoiler (that you ordered from megazip). Did it come with everything required to install the spoiler?

77290-57L01-ZMU SPOILER,REAR, Suzuki
Yes with bolts and 3m tapes stick to spoiler very high quality.
after 2 years no problem with it.

Yep, always OE part especially for sensors. Besides this Chinese sensor do not support 2.4L engine probably would not fit either.

a piece of front or rear spring maybe