Thank you for your response. I can see these parts on ebay. Only I don't know yet if these parts need to be replaced. My mechanic wants to check it out. He says there are timing checking tools for other cars. Can I also buy such tools for Kizashi? If, for example, this tool shows that the chain is s...

The mechanic tells me the timing needs to be checked. To confirm that the chain hadn't changed. He also says that the wholesalers he works with don't have a timing kit and he wants me to deliver it to him. I've been looking and can't find it. Does the timing kit have a part number that I could searc...

as the engine starts, I hear the chain for a few seconds, then it goes silent

old tech wrote:Where are you?

Poland.

Ok, so I have to accept that the gearbox is dead

Today I was in vulcanization use their jack and the axels look probably OK. Both axels have minimal clearance on the differential side. I don't know if such a small clearance is the norm?

When I lift one side of the car on the jack, I understand that the gearbox must be in position P?

Hello, basically since I bought my Kizi 2010 CVT AWD I have been concerned about the sounds. At first, the disturbing sound was heard only when slowing down the car, then the noise accompanied me all the time. Now it is very bad what you can hear on vidoes. I was at several mechanics. They replaced ...

Ok now I understand.

On YT I found guides on how to replace the coolant, so I will do both in one go.
Do I especially pay attention to something when replacing coolant in Kizashi?

I am sorry if such a guide was already here, but I used a search engine and did not find such a thread. Today I wanted to replace FILTER FOR COOLER RETURN according to this guide: https://www.kizashiclub.com/forum/viewtopic.php?f=28&t=4657&fbclid=IwAR29AmtKDrKHd7WL8hLy-jbTGwGBbSMpQtK9Ap9VeTO...

ok thanks for the advice. I ordered this filter and fault from Mitsubishi