Adapting Kizashi for vertically challenged.
Posted: Fri Feb 21, 2020 3:14 pm
I took a 2013 Suzuki Kizashi SLS and adapted it to a girl that was just over 4 foot tall. I made pedal extensions that could be removed and installed easily so family members could also drive it . I made them from old Corolla pedals , carriage bolts, 1/4 inch square stock , nuts and washers from Home Depot. For docking on the original pedals, I made steel brackets with 1/4 drive socket welded to the side.I made a foot rest or raised floor out of two by fours and piece of plywood to Cover it with using original Kizashi carpeting from a parts car to make it match nicely. I used the spare tire docking from a Subaru
I think it was and adapted it to work for quick and safe mounting. I used wrist pins and longer bolts to use as spacers to raise driver seat over two inches. Then omitted under dash panel and trimmed the under column panel. It all came out nice and is quick and easy to install or take out the pedals and raised floor. I know this is no interest to the vast majority but I’m sure there is a few it may interest.
Sent from my iPhone using Tapatalk
I think it was and adapted it to work for quick and safe mounting. I used wrist pins and longer bolts to use as spacers to raise driver seat over two inches. Then omitted under dash panel and trimmed the under column panel. It all came out nice and is quick and easy to install or take out the pedals and raised floor. I know this is no interest to the vast majority but I’m sure there is a few it may interest.Sent from my iPhone using Tapatalk