Drivers door won't lock/unlock with fob

[Brad20v]

Hello everyone
I'm hoping someone can steer me in the direction to fault find my door issue on AWD .
When using remote,/fob , drivers door won't react, all other doors work. If i sit in vehicle and use the door lock/ unlock button....same same all but drivers door.
I can however lock and unlock via the key, and this also controls the other doors too.
I'm thinking the motor/solenoid in door, but am yet to remove door trim.
Thanks

[SAEED_KIZZY]

Did you check for blown fuses?
I suggest checking all fuses related to BCM and also the keyless module

[Brad20v]

No I have not yet , I would think it's more than a fuse, as the others all work.
Thanks

[SAEED_KIZZY]

No I have not yet , I would think it's more than a fuse, as the others all work.
Thanks

yes,but sometimes lack of some power feed to BCM can cause strange things beside it's easy to check compared to the next steps

Performance Benchmark_20200921.png (27.02 KiB) Viewed 3133 times

[Brad20v]

True that, I will check today
Thanks

[Brad20v]

I checked all fuses on the 3 fuse boxes, nil faulty found, guess I remove door trim and have a test in there .