Kizashi Club

Hello everyone
I'm hoping someone can steer me in the direction to fault find my door issue on AWD .
When using remote,/fob , drivers door won't react, all other doors work. If i sit in vehicle and use the door lock/ unlock button....same same all but drivers door.
I can however lock and unlock via the key, and this also controls the other doors too.
I'm thinking the motor/solenoid in door, but am yet to remove door trim.
Thanks

Did you check for blown fuses?
I suggest checking all fuses related to BCM and also the keyless module

No I have not yet , I would think it's more than a fuse, as the others all work.
Thanks

Brad20v wrote:No I have not yet , I would think it's more than a fuse, as the others all work.
Thanks

yes,but sometimes lack of some power feed to BCM can cause strange things beside it's easy to check compared to the next steps

True that, I will check today
Thanks

I checked all fuses on the 3 fuse boxes, nil faulty found, guess I remove door trim and have a test in there .

Did you ever resolve this issue? I have the same problem. Instead of unlocking the driver door with the fob or button in the door handle, I get a different style of beep and nothing mechanically happens. Started happening yesterday. Can get in any other door and the trunk also works with the fob and proximity.

Just ordered https://www.megazip.net/zapchasti-dlya/ ... 5057L35000 door latch actuator. My problem is not exactly the same as the OPs, as my lock only will not open using the remote/handle button/indoor switch. It locks perfectly however using the remote/button/indoor switch. Just the unlocking is an issue.

I have had the door lock motor go bad before. You need the latch assembly . I'd go used . I do have one for $40 +shipping but you may want to see what's available near you. Good luck.


Sent from my iPhone using Tapatalk