Serpentine belt too big?

Ask technical questions or post on problems/issues related to the Kizashi under this topic. Symptoms and pictures of your problem are a good idea.
NOTE: Any car related technical question can be posted here.
Post Reply
Sitedude
Posts: 1
Joined: Wed Apr 19, 2023 11:00 pm

Hi guys a 2010 kizashi. The tensioner pulley broke and replaced that. I am attempting to put the new belt on the car but it almost seems like it's too big?

Am I missing something

Thanks guys
Top
old tech
Posts: 706
Joined: Mon Apr 23, 2018 1:51 pm
Location: n/w pennsysvania

You probably have incorrectly routed the belt. Here’s a handwritten diagram that is correct. I’m hoping that you put on a whole tensioner unit as the tensioner unit does fail with miles on it. After you put the belt on it, You should rotate the crankshaft counter clockwise and watch the belt at the pulley tensioner pulley if it starts riding off then the tensioner will have to be corrected. if you look in Kizashi technical forum and use the search cheap fix belt 09 tensionerImage



Sent from my iPhone using Tapatalk
Top
Post Reply

Return to “Kizashi Technical Support & Problem Troubleshooting”