Page 1 of 1

Neat site I came across

Posted: Sat Aug 11, 2012 11:16 pm
by bobby_hill
Just plug in year make and model and look up damn near any part you want :D I thought it was interesting anyway.

http://www.oemsuzukiparts.com/

Re: Neat site I came across

Posted: Mon Aug 13, 2012 11:08 pm
by PittsburghJoe
The other day I saw another Kiz on the road that was debadged and he left the AWD and SLS badge on. The problem is that I don't have the SLS badge but would like to get it. I couldn't find it on the site you mentioned. Anyone have insight in to this label?

Thanks,

Joe

Re: Neat site I came across

Posted: Tue Aug 14, 2012 2:09 pm
by jinx1984
I dont think they have a badge denoting the model (S,SE,GTS,SLS) on them from the factory. I have an SLS model and it didnt have and "SLS" badge on it.

Here is the link to all the "body hardware" for the Kizashi. The badges are towards the bottom of the part diagrams.

http://www.oemsuzukiparts.com/parts/201 ... am=viewAll

Re: Neat site I came across

Posted: Tue Aug 14, 2012 2:21 pm
by nytq
You can make your own if you wish. I debaged the Suzuki and kizashi emblems from the rear and added a 2.4 to the left side and the same level as the AWD. Got these real metal chrome plated emblems at: http://chromeemblems.com

Re: Neat site I came across

Posted: Tue Aug 14, 2012 8:44 pm
by PittsburghJoe
nytq wrote:You can make your own if you wish. I debaged the Suzuki and kizashi emblems from the rear and added a 2.4 to the left side and the same level as the AWD. Got these real metal chrome plated emblems at: http://chromeemblems.com
Cool site. Thanks. I just ordered the SLS. As far as the debadging sp? goes I've read a few different posts on this forum with regards to a simple pry it off to a more complicated 4 or 5 step process. Which did you use? Thanks!

Re: Neat site I came across

Posted: Tue Aug 14, 2012 9:07 pm
by nytq
A little warming up with a hair dryer and light pulling. Later a bit of liquid compound to remove residue.

Re: Neat site I came across

Posted: Thu Aug 16, 2012 4:54 pm
by PittsburghJoe
Cool. I'll do that. Also what should I use to get dealer sticker off? It's just a sticker so I can't "pry" on anything. Obviously I want something that won't damage the paint. Thanks again for the answer!

Re: Neat site I came across

Posted: Thu Aug 16, 2012 10:15 pm
by nytq
Sticker should just peel off. Use compound and maybe some alcohol to remove residue.