Front Bumper Tow Hook Bolt socket threading

Anything related to the Kizashi can go here, but please look at the other headings first. Your topic may fit better under something else.
Post Reply
diegobear
Posts: 14
Joined: Thu Oct 19, 2017 9:31 pm

Hi guys,

I was wondering of anyone knew for certain what the bolt size/threading is for the bolt-hole in the front bumper used for the tow hook.

I took my tow hook to Home Depot to see if anything fit but all of the hardware they had was just a bit too small.

There is DIY write-up floating around here that claims that 3/4" will fit, but it most definitely is not the correct size. By my measurements it's just over 19mm diameter with a turn every 2.5mm. I'm trying to find out locally with machinists but if someone already has the bolt diameter and pitch available I'd really appreciate it
diegobear
Posts: 14
Joined: Thu Oct 19, 2017 9:31 pm

Just figured it out. It's a 20mm with a turn every 2.5mm: M20x2.5
Post Reply