Front Bumper Tow Hook Bolt socket threading
Posted: Fri Dec 08, 2017 11:35 pm
Hi guys,
I was wondering of anyone knew for certain what the bolt size/threading is for the bolt-hole in the front bumper used for the tow hook.
I took my tow hook to Home Depot to see if anything fit but all of the hardware they had was just a bit too small.
There is DIY write-up floating around here that claims that 3/4" will fit, but it most definitely is not the correct size. By my measurements it's just over 19mm diameter with a turn every 2.5mm. I'm trying to find out locally with machinists but if someone already has the bolt diameter and pitch available I'd really appreciate it
I was wondering of anyone knew for certain what the bolt size/threading is for the bolt-hole in the front bumper used for the tow hook.
I took my tow hook to Home Depot to see if anything fit but all of the hardware they had was just a bit too small.
There is DIY write-up floating around here that claims that 3/4" will fit, but it most definitely is not the correct size. By my measurements it's just over 19mm diameter with a turn every 2.5mm. I'm trying to find out locally with machinists but if someone already has the bolt diameter and pitch available I'd really appreciate it