install aftermarket amplifier on Kizashi base without Rockford system

The Do It Yourself section is used provide assistance with mods and fixes. Whenever you are making a change to your car please take pictures and notes. Let others know what to watch out for and any useful tricks you learn. If you are starting a post in this section from scratch please hold it to a higher standard than you would for other forum posts. i.e. technical detail and even grammar.
Please post about issues or problems in the Technical Support & Problem Troubleshooting forum.
Post Reply
Satya166
Posts: 5
Joined: Wed Mar 27, 2024 6:04 am

Yes not a pro but have worked on my motorcycle electrical circuit.
Will open up the trims and let you know sir.

From the diagram I can understand that the signal for centre speaker is spliced and given to the door speakers.

If centre speaker is working that means the head unit is giving signal correct?
Top
User avatar
SAEED_KIZZY
Posts: 511
Joined: Wed Sep 13, 2017 2:31 pm

that's correct. Keep in mind that because all left or right speakers are spliced from one wire problems in one speaker can cause other speakers to fail too.
Top
Post Reply

Return to “Kizashi DIY Write-ups & Posts”