Page 1 of 1
FogLight Switch Blank Plate Removal (someone must know)
Posted: Mon Apr 15, 2013 9:40 pm
by ronwat1942
Hi, Could someone tell me how to remove the blank plates where the esp & fog light switches are do they come out from the front or the back behind the dash, i knead to remove one and put a switch in one spot, or do i knead to remove that part of the dash. thanks
Re: FogLight Switch Blank Plate Removal (someone must know)
Posted: Fri Apr 19, 2013 3:48 pm
by BigJLen
I don't know if this will help but here is a page from my oem fog light kit.
I haven't installed them yet but from the pix, it looks like it comes out from behind.
Hope this helps!
Re: FogLight Switch Blank Plate Removal (someone must know)
Posted: Fri Apr 19, 2013 4:22 pm
by WIKizashi
Hello BigJLen,
How difficult does the rest of the fog light install look? I'm thinking of getting a set for my SE. Is it pretty much plug and play?
Re: FogLight Switch Blank Plate Removal (someone must know)
Posted: Fri Apr 19, 2013 5:00 pm
by nytq
I recently put in. Very simple. If you haven't removed the bumper before you will be surprised how easy it is. The whole process is plug and play. The kit includes the interior switch, and 2 harnesses depending on euro or us model. No relay is needed. It is already integrated in the car and headlights switch system.
Re: FogLight Switch Blank Plate Removal (someone must know)
Posted: Mon Apr 22, 2013 3:07 pm
by WIKizashi
Nice, thanks for the feedback, nytq.
Re: FogLight Switch Blank Plate Removal (someone must know)
Posted: Tue Apr 23, 2013 5:46 pm
by BigJLen
Sorry for the late reply - been sick.
At any rate, yeah, it's plug and play like others have said.
Very easy!