Page 1 of 2

install OEM rear spoiler

Posted: Sat Feb 02, 2019 1:26 pm
by SAEED_KIZZY
I found OEM rear spoiler on Megazip warehouse in UAE and order it.
my car had no rear spoiler so I have to make 4 holes on my trunk to fit spoiler, 2 for 7mm screw and 2 for plastic fastener.
and also I have some difficulties for stop light because it is different from OEM type.
I decided to cut some pieces of spoiler and make it fit to my car stop light.

Re: install OEM rear spoiler

Posted: Sat Feb 02, 2019 4:19 pm
by WESHOOT2
Nice!

Re: install OEM rear spoiler

Posted: Sat Mar 02, 2019 7:58 pm
by Kimgraesdal
Did you use screws?

Re: install OEM rear spoiler

Posted: Sat Mar 02, 2019 8:23 pm
by SAEED_KIZZY
Kimgraesdal wrote:Did you use screws?
Yes OEM spoiler comes with 2 screws with nut and also 2 plastic clips on edge.
so I have to cut 4 holes in trunk lid.

Re: install OEM rear spoiler

Posted: Sat Mar 02, 2019 8:35 pm
by Kimgraesdal
Is it easy, is there any "pre hole" in the trunk

Re: install OEM rear spoiler

Posted: Sat Mar 02, 2019 8:51 pm
by SAEED_KIZZY
Kimgraesdal wrote:Is it easy, is there any "pre hole" in the trunk
Yes half an hour work I think really easy.
No pre holes I had to drill 4 holes.
off course it is better to replace stop light with rear spoiler type to fit this spoiler but it costs 72$ so I decided to use my stop light instead and do some little modification to spoiler to fit.

Re: install OEM rear spoiler

Posted: Sat Oct 05, 2019 6:53 pm
by SAEED_KIZZY
About a month ago I made a discovery :D and found this hole and cap on each door
photo_2019-10-05_21-06-17.jpg
photo_2019-10-05_21-06-17.jpg (80.31 KiB) Viewed 11360 times
and I do some research and find out this hole use to mount side sill guard and technically can be mounted on my kizashi so I ordered parts and it turn out really fully compatible.to install side sill guards I have to drill some holes in door.
photo_2019-10-04_14-26-02.jpg
photo_2019-10-04_14-26-02.jpg (37.93 KiB) Viewed 11360 times
I made a template for guards and use it to drill and it really helped a lot.
photo_2019-10-05_21-14-25.jpg
photo_2019-10-05_21-14-25.jpg (37.9 KiB) Viewed 11360 times
there are 4 plastic clips and one bolt and nut for each door. and final results:
photo_2019-10-05_21-18-12.jpg
photo_2019-10-05_21-18-12.jpg (61.81 KiB) Viewed 11360 times
photo_2019-10-05_21-18-19.jpg
photo_2019-10-05_21-18-19.jpg (77.73 KiB) Viewed 11360 times
photo_2019-10-05_21-16-42.jpg
photo_2019-10-05_21-16-42.jpg (141.85 KiB) Viewed 11360 times

Re: install OEM rear spoiler

Posted: Sun Oct 06, 2019 12:52 pm
by Ronzuki
Nice work! Gutsy move to drill holes in perfectly good sheet metal, however, your daring efforts were rewarded.

Re: install OEM rear spoiler

Posted: Sun Oct 06, 2019 2:32 pm
by SAEED_KIZZY
Ronzuki wrote:Nice work! Gutsy move to drill holes in perfectly good sheet metal, however, your daring efforts were rewarded.
Thanks Ronzuki :D

Re: install OEM rear spoiler

Posted: Mon Oct 07, 2019 8:08 am
by Tom Kizzie
Cool. Nice job. :drive: