Kizashi Club

Your Kizashi Owners Club and Forum 

Where DIYs with photos live. Please start new topics in DIY section. Completed DIYs are moved here for clutter control and quicker reference.
 #35732  by KuroNekko
 Fri Mar 13, 2015 7:31 pm
bootymac wrote:Take the screw to Home Depot Motorsports and find something that matches the threads


Home Depot sucks when it comes to Metric. I have better luck at small, independent hardware stores when finding Metric screws, bolts, etc.

I also once found a decent website that sold automotive fasteners like plastic clips and screws. I'll have to post on it when I find it again. I wonder if they have Suzuki parts.
 #35733  by lishous23
 Fri Mar 13, 2015 9:38 pm
KuroNekko wrote:
bootymac wrote:Take the screw to Home Depot Motorsports and find something that matches the threads


Home Depot sucks when it comes to Metric. I have better luck at small, independent hardware stores when finding Metric screws, bolts, etc.

I also once found a decent website that sold automotive fasteners like plastic clips and screws. I'll have to post on it when I find it again. I wonder if they have Suzuki parts.


Thanks for the responses! I too have tried Home Depot, Lowe's, and a few chain auto parts stores with no luck. I will try and find a more independent hardware store and let you know if I have any success. Thanks for the advice! :-)
 #35737  by Ronzuki
 Sat Mar 14, 2015 4:22 pm
krell wrote:Call Mike at Jeff D'Ambrosio Suzuki in Frazer 610-251-0900 they got all the screws there.


yep X2...I had picked up a few of the reusable plastic pop-fasteners last time I was there. Mike's a great guy and been around zuk parts along time.

Other than that, as was mentioned, most smaller hardware stores (True Value and ACE types) usually have a nice selection.
 #35742  by Ronzuki
 Sun Mar 15, 2015 6:19 pm
What's that supposed to mean??
 #39010  by KuroNekko
 Fri Nov 06, 2015 10:00 pm
KuroNekko wrote:
lishous23 wrote:Again... awesome info for owners... much appreciated.

We're getting good at the headlight replacement (thanks to all the great instructions on this board)... but this time around, two of the screws underneath the center of the bumper are rusted to the point where I will need to "drill" them out. Problem is, I'm having a hard time finding replacement screws. Any insight about the size of screws to replace?

Thanks so much!


I don't have info on the screws but I too need to replace one that is missing. I plan to look into it and post info if/when I find it.


Update:
Suitable screws can be found at Autozone in a pack of 8 or 10. They work great and come in various lengths.
 #39012  by KuroNekko
 Fri Nov 06, 2015 10:06 pm
Note:
There is a minor error in the harness description in the tutorial. The harness doesn't connect to the LH HID bulb but actually to the car's H7 connector in the LH headlight. This is how the kit is turned on and off via the car's headlight wiring. I'll edit the error at a later time.
  • 1
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11