Re: Bumper Removal, Headlight Removal, and HID Kit Installat
Posted: Fri Mar 13, 2015 6:58 pm
Take the screw to Home Depot Motorsports and find something that matches the threads
Your Kizashi Owners Club and Forum
https://www.kizashiclub.com/forum/
Home Depot sucks when it comes to Metric. I have better luck at small, independent hardware stores when finding Metric screws, bolts, etc.bootymac wrote:Take the screw to Home Depot Motorsports and find something that matches the threads
Thanks for the responses! I too have tried Home Depot, Lowe's, and a few chain auto parts stores with no luck. I will try and find a more independent hardware store and let you know if I have any success. Thanks for the advice!KuroNekko wrote:Home Depot sucks when it comes to Metric. I have better luck at small, independent hardware stores when finding Metric screws, bolts, etc.bootymac wrote:Take the screw to Home Depot Motorsports and find something that matches the threads
I also once found a decent website that sold automotive fasteners like plastic clips and screws. I'll have to post on it when I find it again. I wonder if they have Suzuki parts.
yep X2...I had picked up a few of the reusable plastic pop-fasteners last time I was there. Mike's a great guy and been around zuk parts along time.krell wrote:Call Mike at Jeff D'Ambrosio Suzuki in Frazer 610-251-0900 they got all the screws there.
Fixedkrell wrote:Call Mike at Jeff D'Ambrosio Suzuki in Frazer 610-251-0900 for a good screwing
Update:KuroNekko wrote:I don't have info on the screws but I too need to replace one that is missing. I plan to look into it and post info if/when I find it.lishous23 wrote:Again... awesome info for owners... much appreciated.
We're getting good at the headlight replacement (thanks to all the great instructions on this board)... but this time around, two of the screws underneath the center of the bumper are rusted to the point where I will need to "drill" them out. Problem is, I'm having a hard time finding replacement screws. Any insight about the size of screws to replace?
Thanks so much!