15mm sway bar bushings

Let others know about your performance modifications, and help members find the parts they want.
Post Reply
Posts: 1
Joined: Mon Mar 06, 2023 10:53 pm

Ive got some annoying clunking that's supposedly attributable to worn out sway bar bushings on my 2012 Kizashi. The problem seems to be that I can't find any replacement bushings. I did want to use the Moog bushings but they (Moog) weren't clear as to which one would work. Does anyone have any suggestions or defined part numbers for the Moog bushings? Thanks in advance,
User avatar
Posts: 5082
Joined: Wed Aug 15, 2012 5:08 pm
Location: California, USA

If the sound is clunking, I'd inspect the sway bar end links and the shocks. Worn sway bar bushings make more of a squeak sound in my experience. Nonetheless, it's the universal parts from Moog you need to use.
I have the RRM sway bar and when those bushings wore out, I got the Moog universal 19mm bushings, which were far better. Perhaps the 16mm universals will work to replace the OE ones but I can't attest to them.
https://www.moog-suspension-parts.com/u ... shings.asp
2011 Suzuki Kizashi Sport GTS 6MT (Black)
User avatar
Posts: 1143
Joined: Sun Apr 28, 2013 10:09 am
Location: Laurel, MD

In my case, it was the end links.
Alcohol, Tobacco, and Firearms
Should be a convenience store, not a government agency
Posts: 263
Joined: Mon Apr 22, 2013 4:39 am

If I needed a replacement for the 15mm stock parts, I would probably try the Prothane 19-1103 (or 19-1151 if you want a set with a grease fitting) universal set. Spec on them is 9/16" (14.3mm), but the Prothane bushings are ribbed on the inside, and should squish down the extra 0.7mm without much of an issue. The other issue for a universal bracket set is the hole spacing, which is approximately 2.25" in the stock bracket. That prothane set has slots for 2" - 3" spacing (many other makes and styles the tightest spacing is about 2.5" )
Post Reply