Page 1 of 1

Black and Red PlastiDip

Posted: Wed Feb 22, 2017 2:41 am
by MrMeaty
Can't mod to much cause I'm giving it to my kid when she can drive, so at least if she doesn't like these colors, she can just peel them off. It was my first time using Plastidip so I'm not sure how great it came out.
20170220_175857.jpg
20170220_175857.jpg (432.7 KiB) Viewed 21241 times
20170220_175835.jpg
20170220_175835.jpg (430.34 KiB) Viewed 21241 times
20170220_175654.jpg
20170220_175654.jpg (228.9 KiB) Viewed 21241 times
20170220_175643.jpg
20170220_175643.jpg (261.06 KiB) Viewed 21241 times
20170220_121457.jpg
20170220_121457.jpg (162.36 KiB) Viewed 21241 times

Re: Black and Red PlastiDip

Posted: Wed Feb 22, 2017 2:13 pm
by jadeng97
They look good! I love plasti-dip because if you don't like it or mess it up you just peel it off. I have a Red Kizashi and basically everything you did red I've done black including my wheels.

Re: Black and Red PlastiDip

Posted: Wed Feb 22, 2017 3:08 pm
by LPSISRL
I'm usually not much of one for blinging up my car. I debadged mine except for the Kizashi. But I like these. I'm assuming you had to remove the emblems before dipping? You should photoshop the wheels in red to see how they would look. Too much?

Re: Black and Red PlastiDip

Posted: Wed Feb 22, 2017 5:49 pm
by jadeng97
LPSISRL wrote:I'm usually not much of one for blinging up my car. I debadged mine except for the Kizashi. But I like these. I'm assuming you had to remove the emblems before dipping? You should photoshop the wheels in red to see how they would look. Too much?
That's the nice thing about Plasti-Dip you don't have to remove the emblems to do them. Just tape off an area around them. Spray it and then remove the excess. Super Easy!

Re: Black and Red PlastiDip

Posted: Wed Feb 22, 2017 7:46 pm
by Onikarge
Awesome, it looks like a fierce but subtle paint war.

Maybe I would try to remove the plastidip from the back S badge and donĀ“t "leave alone" the chrome from the exhausts (and the front S badge).

Re: Black and Red PlastiDip

Posted: Thu Feb 23, 2017 4:41 pm
by MrMeaty
jadeng97 is correct. That's why I liked it. No need to remove badges. Just tape, spray and peel. In fact, I didn't have to remove my wheels either. I just tore some plastic bags in half, shoved them between the spokes to cover the breaks and sprayed, then wiped off the excess.

Onikarge, I still need to do my front badge as well, and was considering the chrome exhaust outlets in red, but I'm concerned the exhaust would show very quickly as the plastidip is quite tacky. I could, however, do the exhaust tips in black as I only needed 2 cans to get 3 coats on all 4 wheels, and I bought a 6 pack so I have plenty of black left.

Re: Black and Red PlastiDip

Posted: Tue Jun 20, 2017 10:17 am
by Ruddell
Ooh that looks nice!

Re: Black and Red PlastiDip

Posted: Fri Jun 15, 2018 7:02 am
by Motasem
Here's mine.

Re: Black and Red PlastiDip

Posted: Mon Jan 20, 2020 7:48 am
by SamirD
Nice black and red! Looks a lot better than I thought it would.

Re: Black and Red PlastiDip

Posted: Thu Apr 15, 2021 3:02 am
by stockton08
They all look stunning. I'm very fond of black wheels, it really makes the overall exterior look classy. I recently got a set of Black Rhino wheels from 4WheelOnline, which I installed in my truck. I already got a set of black wheels for my Suzuki last year.