F/S: 19x9.5 Gray/Gunmetal VMR V703 (VB3) Wheels 5x114.3 +45 Offset - Square Setup

[CG1]

Selling the setup I posted here.

Specs:

Wheels: VMR model VB3
Size: 19x9.5
Offset: ET45
Lug: (custom drilled to 5x114.3)
Tires: Delinte D7
Size: 255/35/19

I'd like to get $750 for the set picked up. Or I can strip the rubber and mail them out at that price. (I pay for shipping and keep the rubber ). Rubber is 9-10/32 (basically full tread).

[achrystal93]

How much to ship out with the rubber? This set up looks amazing

Sent from my ONEPLUS A6013 using Tapatalk

[CG1]

SOLD.

[AirRideFan]

Selling the setup I posted here.

Specs:

Wheels: VMR model VB3
Size: 19x9.5
Offset: ET45
Lug: (custom drilled to 5x114.3)
Tires: Delinte D7
Size: 255/35/19

I'd like to get $750 for the set picked up. Or I can strip the rubber and mail them out at that price. (I pay for shipping and keep the rubber ). Rubber is 9-10/32 (basically full tread).

I realize these are sold, but just had one question--- do the oem suzuki center caps fit in them, with no mods?

I have a set of (19 x 8.5) Niche TARGA wheels on my Kiz for my winter setup--- wondering if my oem center caps would just pop right into them, also?

LAST QUESTION--- Do you happen to know the outer diameter of the OEM Suzuki center caps that you used.

Lastly--- Still have your (SWEET!) Black KIZASHI? Can you post some photo's of it, currently..? Your car has always been one of my favs on this site, man. So perfect.

[CG1]

I realize these are sold, but just had one question--- do the oem suzuki center caps fit in them, with no mods?

LAST QUESTION--- Do you happen to know the outer diameter of the OEM Suzuki center caps that you used.

Lastly--- Still have your (SWEET!) Black KIZASHI? Can you post some photo's of it, currently..? Your car has always been one of my favs on this site, man. So perfect.

If I recall, the OEM center caps from the SLS wheels are pretty small. I sourced the ones I used from a Suzuki Equator on Ebay. I have like 2 or 3 sets of them. They didn't clip right into the VMR wheels, but some dremeling and gluing, and they looked as if they did. I seem to recall them being 2.75" or ~75mm, but that's a strange guess. I can measure them.

Thanks for the props. That first go 'round was an easy OEM+ looking upgrade over that winter. I've since torn it apart for a more bold outfit, but have been distracted with a number of other things since. Oddly, I never really took any pictures of it when it was on the road. My pictures are usually captured in a much more intimate setting ...

[CG1]

I seem to recall them being 2.75" or ~75mm, but that's a strange guess. I can measure them.

Confirmed.