No Sound for aftermarket stereo

Anything related to the Kizashi can go here, but please look at the other headings first. Your topic may fit better under something else.
Post Reply
ccwhitt
Posts: 3
Joined: Mon Apr 16, 2018 4:58 pm

Hey, I recently bought a 10.1 Android Stereo to put in my Kizashi. I bought the wiring harness and antenna adapter and wired it up and put it in last night...everything seems to work except the sound...I have no sound whatsoever...has any had this problem?
I have a RF system in the car also, which I did get the correct S106B harness for it.
ccwhitt
Posts: 3
Joined: Mon Apr 16, 2018 4:58 pm

Any suggestions would help.
User avatar
SAEED_KIZZY
Posts: 507
Joined: Wed Sep 13, 2017 2:31 pm

it can be a problem with remote wire of amplifier check pin12 of headunit connector and and also pin5 of Amplifier connector this pins must be 12V when headunit is ON in both side.
New Bitmap Image.jpg
New Bitmap Image.jpg (47.09 KiB) Viewed 2922 times
User avatar
Drem
Posts: 85
Joined: Thu Mar 24, 2011 3:03 am

Mine has an option to turn the amp (high level output) on/off. I think it defaulted to off. You'll want that on for your setup.

Mine is under Options > Device > Sound > AMP ON/OFF

Look for a similar setting and verify.

Sent from my SM-G950U using Tapatalk
2011 - Sport SLS AWD - Platinum Silver
Post Reply