Depending on the price, it sounds like it should be a good deal. Most others have posted about the small things to watch for.mcyclone wrote: ↑Sat Oct 30, 2021 2:02 am Greetings!
I'm close to pulling the trigger on buying a used 2012 Kizashi Sport, with about 65k miles on it.
Before I do I thought I would come to you guys and ask 1) Is this a good idea? and 2) what issues should I be on the look out for, anything that could come up in a test drive that I should be wary of?
Appreciate any advice and insight <3
If you are unsure about changing the CVT fluid, I would just look at the condition via the dipstick and monitor that instead. You are absolutely right that having the wrong person mess with this will cause a problem versus prevent one. It seems that most cars these days are ruined by bad service than anything else.KlutzNinja wrote: ↑Tue Nov 02, 2021 6:56 pmI’ve been thinking a lot about the CVT fluid change lately, because my car was probably driven pretty roughly for the first 51+k miles before I got it. It’s a little scary not really knowing how it was treated before. I’ve had it for over 17k miles now. I was reading some of the fluid change procedure threads here and it seems really more than what I can do. It also seems more complex/intricate than what the average independent mechanic can do assuming they don’t have the service manual handy. Maybe I’m underestimating their abilities. I’m not really sure how that works with mechanics; is there some database they pull this info from? Or do they just wing it every time lol. I wouldn’t want someone, even a mechanic I’d normally trust, to just wing it on something as important as this. There’s a lot of torque specs for this and that,KuroNekko wrote: ↑Mon Nov 01, 2021 8:00 pm The UK only got the top-spec AWD models with the CVT. The mileage of your vehicle is low so that's a good thing. Listen carefully for any odd noises from the transmission during test drives. Changing the CVT fluid ASAP after purchase is highly recommended. As the others stated, the Kizashi otherwise has relatively minor issues and is a very solid car for the money thus making it a really good value.
removing this part in the engine bay to get to that part, etc. I’m afraid that if they don’t botch the process of removing everything that’s needed, they might forget to put everything back and apply proper torque specs.
So what do you do when you’re not capable of this procedure yourself, and you don’t have a Suzuki mechanic handy? I was thinking of perhaps a Nissan specialist since some models use variants of the same transmission, but I’m still on the fence about it. I’ve asked about this before, but I figure it could be good to bring it up again; maybe others will give their input. I’ll go look at what the responses were from last time.
Sorry for the thread hijack. I’ll try to contribute. I think I’ve seen UK/European models have both halogen and xenon headlights? If so, the halogen bulbs tend to burn out faster than average, and the replacement process is a pain in the butt at least the first time. There are threads here that can help with it, thankfully. And there are also threads for HID or LED conversions if you’d rather go that route.
Speaking of xenon/halogen bulbs, I saw a last-gen Nissan Altima with one halogen bulb and one HID bulb and it was the biggest automotive eyesore I’ve seen in a while. Like the car version of heterochromia. Yuck. I hope no one here does that with their Kizashis. Heterochromia in humans and animals is cool, though.