Kizashi Club

Your Kizashi Owners Club and Forum 

If it has an S on the front you can talk about it here.
 #50702  by SSHREST4
 Sat Nov 09, 2019 1:00 am
Hello Everyone,
I have a 2012 Suzuki Kizashi AWD with 128K miles. Recently I had an issue with my car where I had multiple cylinder misfiring codes. It was cylinders 2, 3 and 4. I got 3 new ignition coils and 3 new spark plugs. I replaced these parts on cylinders 2, 3 and 4. When I used my reader again, it showed only cylinder 4 is misfiring. I thought maybe the new parts that I got might have come defect and then swapped parts between the cylinders three and four (new ones). Still, engine 4 is showing misfiring. So I assume the coils and spark plugs are fine. Any idea what can be the issue. The car is way smoother but the car jerking can be felt and also the check engine light is on. So, is there any wiring issue or something else since the ignition coil and spark plugs are new and good.

Any help will be appreciated. I have a long trip coming soon and really need to fix my car. Please Help!!!!!

:oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops: :oops:
 #50704  by G13b
 Sat Nov 09, 2019 5:52 am
Sounds like the injector may be the culprit, try to plug in a scanner see if can pull an error code and report back.
 #50747  by LPSISRL
 Mon Nov 18, 2019 6:14 pm
You sure you got the cylinder number order correct? That's exactly what would happen if you put the parts in 1, 2 and 3 instead of 2,3 and 4. If you don't want to switch them all, put what used to be in number 1 into number 4.