Search found 16 matches

by otaku19
Sun Jan 31, 2021 2:41 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: AC Problem
Replies: 1
Views: 526

AC Problem

Greetings everyone! I apologize in advance if this has been covered before. I've noticed that when I push the AC switch on my dash, the air does not get any colder than when the AC is off. The compressor does come on and I can see that my RPMs go up by about 200 while idling. There seems to be plent...
by otaku19
Sun Jan 31, 2021 2:35 am
Forum: Kizashi Technical Support & Problem Troubleshooting
Topic: Cheap fix 12 very ugly headlights
Replies: 7
Views: 1207

Re: Cheap fix 12 very ugly headlights

I've got a kit that I purchased from Amazon that goes to 5k and I'm thinking about touching my headlights up with it very soon. I already have a can of clear coat to finish with
by otaku19
Wed Dec 23, 2020 1:07 am
Forum: Chat About the Kizashi
Topic: Beam Pattern
Replies: 8
Views: 1355

Re: Beam Pattern

I've got everything tidied up so I don't believe that there is anything stopping the housing from moving
by otaku19
Fri Dec 11, 2020 3:10 am
Forum: Chat About the Kizashi
Topic: Beam Pattern
Replies: 8
Views: 1355

Re: Beam Pattern

Any reason as to why I can't adjust the beam pattern? My adjustment screws move but nothing happens to the beam pattern
by otaku19
Thu Dec 10, 2020 9:47 pm
Forum: Chat About the Kizashi
Topic: P0443 Code
Replies: 3
Views: 704

Re: P0443 Code

P0443 has to do with the purge valve back by the gas tank. If it stopped when you changed the spark plugs that was pure coincidence. Might have just been a loose gas cap, but this whole system is subject to a recall. https://kizashiclub.com/forum/viewtopic.php?f=13&t=5144 The odd thing is that ...
by otaku19
Thu Dec 10, 2020 12:35 am
Forum: Chat About the Kizashi
Topic: Beam Pattern
Replies: 8
Views: 1355

Re: Beam Pattern

Quick update on my HID setup. I had the headlights off to change out the turn signals and went ahead and properly seated the bulbs. My beam pattern is much better but I definitely need to order the B type bulbs since the return wire shadow is very noticeable now.
by otaku19
Thu Dec 10, 2020 12:30 am
Forum: Chat About the Kizashi
Topic: P0443 Code
Replies: 3
Views: 704

P0443 Code

I have finally started to do all of the standard maintenance that I haven't done yet. I was getting the P0443 code at least once or twice a week for quite a long time, I hate to admit. I changed the spark plugs two weeks ago and this code (nor any other code) has popped back up. I went past the 60,0...
by otaku19
Sat Dec 05, 2020 1:50 am
Forum: Chat About the Kizashi
Topic: Beam Pattern
Replies: 8
Views: 1355

Re: Beam Pattern

Nope, but I'm interested as my HIDs have a very different beam pattern than the stock halogens. The stock pattern was almost straight across. The HIDs have two high points like an ocean wave. This is the same problem that I am having. I can still see much better at night but I would still very much...
by otaku19
Fri Dec 04, 2020 12:53 am
Forum: Suzuki Kizashi Performance
Topic: Amazon basics synthetic motor oil!
Replies: 12
Views: 8146

Re: Amazon basics synthetic motor oil!

I've also noticed burnoff from Mobil 1. I will definitely give the Super Tech a go when I change my oil
by otaku19
Thu Dec 03, 2020 9:57 pm
Forum: Chat About the Kizashi
Topic: Beam Pattern
Replies: 8
Views: 1355

Beam Pattern

I installed the Morimoto Elite HID kit for my low beams and a set of GTR Lighting LEDs for my high beams. I removed the cover piece for the L/R adjustment screw but when I go to adjust my lights, the beam pattern does not move in any direction. The adjustment screws turn but do nothing for the beam ...