The manual trans models only require the clutch to be depressed to start, not the brake.
The OP looks to have an automatic.
On the autos, if the car is ON, but the engine is not, does it still require the brake to be depressed for the engine to start?
My Kizzy didnt want to start today...
-
NicoleKCkizzy
- Posts: 4
- Joined: Thu Apr 18, 2013 3:30 pm
Thanks everyone for your input! These are some good ideas to go off of. Thank you again! 
2010 Kizashi GTS AWD
-
NicoleKCkizzy
- Posts: 4
- Joined: Thu Apr 18, 2013 3:30 pm
Yes it does require it to be on. The radio only comes on if I'm not pressing the brake.
2010 Kizashi GTS AWD
You're welcome. Let us know how you make out and what the problem was.
Ron
2010 Kizashi GTS, CVT, iAWD (3/10 build date)
2011 SX4 Premium Hatch, CVT, iAWD (12/10 build date)
2018 Mazda CX-5 iAWD Touring
2014 Wrangler JKUW (GONE, traded )
1991 Samurai, 5-Speed, EFI, Soft-Top (
sold)
2010 Kizashi GTS, CVT, iAWD (3/10 build date)
2011 SX4 Premium Hatch, CVT, iAWD (12/10 build date)
2018 Mazda CX-5 iAWD Touring
2014 Wrangler JKUW (GONE, traded
) 1991 Samurai, 5-Speed, EFI, Soft-Top (
sold)I have experienced the excessive crank issue a few times and had the software flashed but it still happens occasionally.
As soon as it happens, I shut the car off and try again; it fires right up.
As soon as it happens, I shut the car off and try again; it fires right up.
2011 Kizashi SX