debadging and LED in dome.

Anything related to the Kizashi can go here, but please look at the other headings first. Your topic may fit better under something else.
Post Reply
Dthrill_08
Posts: 71
Joined: Sun Mar 23, 2014 12:14 pm

I want to debadge the S and
    the kizashi on the back. Does it have holes , is it easy to remove ? How about installing LED inside. Do I use a flat screwdriver and use pop it open?
    Top
    bootymac
    Posts: 1602
    Joined: Fri Jul 19, 2013 1:04 am

    No holes behind the badge

    LEDs have been done many times so there should be some info if you search. The covers pop off with a small flathead
    Top
    Dthrill_08
    Posts: 71
    Joined: Sun Mar 23, 2014 12:14 pm

    To remove the badge I just use a knife or flat screw driver? Is it with that glue?
    Top
    ~tc~
    Posts: 999
    Joined: Tue Mar 29, 2011 3:33 am
    Location: Houston, TX USA

    There are a couple threads on replacing the interior bulbs with LEDs.

    http://Www.superbrightleds.com has everything you need, including the fuse type in the vanity mirrors.

    As for debadging ... Dental floss
    2011 Sport SLS with nav Black Pearl Metallic
    Top
    User avatar
    honsonwong
    Posts: 201
    Joined: Mon May 06, 2013 6:01 am
    Location: B.C. Canada

    Dthrill_08 wrote:To remove the badge I just use a knife or flat screw driver? Is it with that glue?
    There are a lot of video in youtube showing how to debadge.
    Here is an example:
    Top
    bootymac
    Posts: 1602
    Joined: Fri Jul 19, 2013 1:04 am

    Dthrill_08 wrote:To remove the badge I just use a knife or flat screw driver? Is it with that glue?
    Heat gun or hair dryer to warm up the adhesive, then pry it off with something that won't scratch your paint (credit card, dental floss, fishing line, etc)
    Top
    Post Reply

    Return to “Chat About the Kizashi”