question if you think rims would fit.

The Do It Yourself section is used provide assistance with mods and fixes. Whenever you are making a change to your car please take pictures and notes. Let others know what to watch out for and any useful tricks you learn. If you are starting a post in this section from scratch please hold it to a higher standard than you would for other forum posts. i.e. technical detail and even grammar.
Please post about issues or problems in the Technical Support & Problem Troubleshooting forum.
Post Reply
vanclot
Posts: 20
Joined: Sat Jul 30, 2011 2:17 am

I was just curious if these rims would fit out kizashi. 19"x9.5, 5x114.3, +42 offset. My biggest concern would be how much room do we have with the suspension components with the stock wheels. with the new offset it will be just over 11mm closer. Do we have more room then that?

thanks
Top
WESHOOT2
Posts: 1976
Joined: Tue Jan 11, 2011 5:37 pm
Location: Vermont

NEED more offset.


www.tirerack.com Call 'em and ask.
Top
murcod
Posts: 2279
Joined: Fri Aug 03, 2012 12:03 pm
Location: Australia

Tire Rack site is very useful. Plug in your vehicle type and do the rim search in the diameter you're after- then check the rim widths and offsets they say will fit. It will give you a rough idea on if it's possible. IMHO the 9.5" width is going to be a huge problem, both from the suspension clearance/ guard clearance aspect and finding a suitable size tyre that will fit on a rim that wide.
David
Top
vanclot
Posts: 20
Joined: Sat Jul 30, 2011 2:17 am

thanks for the help everyone. greatly appreciated
Top
Post Reply

Return to “Kizashi DIY Write-ups & Posts”