Aftermarket headunit help!

[BxKizashiS]

I installed the pioneer avh-5200bt flip out in my 2012 kizashi. The problem I'm having is every time I start the car all the settings reset and I lose all memory. I found out that the yellow wire from the headunit needs to be on a constant 12v supply. Problem is I can't find it. On the aftermarket harness the yellow wire says 12v constant, but when I confirm with a multimeter I get nothing. I looked up a 12v constant supply for the kizashi and it told me the white/red wire is the constant 12v. Put the multimeter and still nothing.

Anyone knows a 12v constant supply that I can use?? I like checked all the wires with the multimeter and haven't got a 12v reading.

[murcod]

You might have blown a fuse on the white/ red wire?

[BxKizashiS]

You might have blown a fuse on the white/ red wire?

Idk I checked all the fuses under the hood. Maybe there's a fuse box under the dash? Gonna have to check

[murcod]

Yes, there are at least two fuse boxes under the dash. On my RHD Aussie Kizashi one big fuse box is hidden behind the glove box on the lhs and I think there's another I noticed under the driver's side dash as well? (You need to remove the glove box to see the first one mentioned above.)

[BxKizashiS]

I got it!! It was a fuse. The radio 15a fuse under the dash was blown. Radio works perfectly now.