tpms sensors

Anything related to the Kizashi can go here, but please look at the other headings first. Your topic may fit better under something else.
Post Reply
User avatar
11zukizashi
Posts: 282
Joined: Sat Jul 07, 2012 2:03 am

put on my new wheels today
Image
and the service tpms system light came on.
the wheels have tpms sensors, but they are not suzuki brand. can the car be programmed to accept them?
jute2003
Posts: 57
Joined: Fri Jul 01, 2011 2:44 pm

Yes, Try a tire shop or two first and if they can't do it bring the car to the closest dealer. They'll be able to re-pair the sensors to the car.
Kiz224
Posts: 30
Joined: Wed Jan 02, 2013 3:51 pm
Location: Mpls, MN

Wow. I really like those wheels. What are they? I also see that you blocked out your "S" on the grille. Were you able to get it off, or did you mask it and paint it in place? Thanks. Doug in MN.
User avatar
11zukizashi
Posts: 282
Joined: Sat Jul 07, 2012 2:03 am

I used a 5$ roll of carbon fiber vinyl. All you need is an exacto knife a heat gun and 20 minutes. This photo shows the new wide stance, each wheel sits about an inch further out than the stock ones. Once i lower it it will be perfect
Attachments
IMG_20130402_141503_773-1.jpg
IMG_20130402_141503_773-1.jpg (533.82 KiB) Viewed 4071 times
User avatar
Bobolini
Posts: 30
Joined: Thu May 26, 2011 8:23 pm

Nice. What wheel tire combo (sizes) are you using?
Post Reply