Compressed Springs

Anything related to the Kizashi can go here, but please look at the other headings first. Your topic may fit better under something else.
Post Reply
User avatar
G13b
Posts: 75
Joined: Tue Jun 09, 2015 12:12 pm

Yay or nay?

Anyone here know for sure wether having factory springs compressed "professionally" is legal or not? assuming ride height remains legal of course.
If you write wash on mycar I will carve resuscitate me on your chest.
kconklin33
Posts: 166
Joined: Sat Aug 24, 2013 2:58 am

I doubt it's illegal. I cut mine and I haven't had any legality issues. Went through inspection fine as well. Where do you know that compresses springs?
User avatar
G13b
Posts: 75
Joined: Tue Jun 09, 2015 12:12 pm

OZ Tyres at Liverpool Sydney offer this sort of service, did u happen to have issue with the stock shocks after you lowered the car?

Was going to buy lowering spring however only has 30mm - 40mm dropped which is not to my liking.

Sent from my GT-I9305T using Tapatalk
If you write wash on mycar I will carve resuscitate me on your chest.
kconklin33
Posts: 166
Joined: Sat Aug 24, 2013 2:58 am

Same issue here. I have H&R lowering springs and they're not cutting in terms of appearance. I cut my stock ones, the ride is less than desired.
User avatar
G13b
Posts: 75
Joined: Tue Jun 09, 2015 12:12 pm

Is it still sitting on stock shocks? please post stance photo before & after of the car.
If you write wash on mycar I will carve resuscitate me on your chest.
kconklin33
Posts: 166
Joined: Sat Aug 24, 2013 2:58 am

Will do! Still on stock struts. Like I said not the most favorable ride, pretty much riding on just bump stops in the front.
Post Reply